FREE DELIVERY ON UK ORDERS OVER £60 *except on Interior Design & Construction Products
Installation Instructions
- Make a mark with a pencil on the board where you would
like the screws, one in each corner. - Insert the eyelets on the screws
- Lay the board on a flat horizontal surface and drill the
screws with eyelets through the cork but only to the surface of the back of the
board. - With the screws in place, hold the board against the wall
and decide where it looks its best. - When you are happy with the position, still holding the
board in its position, screw the screws a bit more to make a mark on the wall. - Remove the board and make sure that the marks on the wall
are well visible. If not, repeat the previous step. - Drill the wall with an 8mm drill in the places you marked
on the wall. Insert the wall plugs on those holes. - Hold the Cork Board back against the wall and gently
insert the tips of the screws into the wall plugs, and screw them in.
The tools needed to fix the notice boards are:
- Driller
- 8mm drill
- Pencil or pen to mark the
holes on the boards - Level to assure that the
boards are levelled - Philips screwdriver