Cork Contact Adhesive Wakol D3540
A solvent-free, water-based latex adhesive for installing cork tiles on porous and non-porous subfloors and walls indoors.
Application method: velour roller or brush
Consumption: minimum 250 g/m²
Airing time: approx. 30-45 minutes on absorbent subfloors, approx. 60-90 minutes on non-absorbent subfloors
Material: latex/acrylate dispersion
> The floor must be smooth, dry and dust free;
> Apply adhesive with short hair velour roller on cork backing and subfloor//wall. Apply adhesive evenly and fully to cork backing, forming a complete adhesive film. Avoid adhesive pools;
> Wait until both adhesive films are dried and completely transparent;
> Lay down the cork tiles to fit and knock tightly and completely with a rubber hammer to ensure a complete bond formation;
> Lay down further cork tiles to fit and knock tightly with a rubber hammer;
> Light use after 2 hours and full use after 3 days.